2002 civic 1.7 5mt problems
So, I just finished changing the timing belt on my car. I had a code for the crank position sensor, but that was the only issue. Until about an hour into my drive home, it threw both accessory belts. Any idea what could cause this, especially both belts at once? They were both tight, and my car is not out of time. Any ideas? Thanks!
|
welcome to the forum. belt in poor condition, pully out of alignment, auto tensioner weak.
|
Originally Posted by acmech52
(Post 40525)
welcome to the forum. belt in poor condition, pully out of alignment, auto tensioner weak.
|
Use a straight edge and see where it's out of alignment. Something is not installed correctly.A washer missing or added in wrong place.
|
Originally Posted by grcauto
(Post 40530)
Use a straight edge and see where it's out of alignment. Something is not installed correctly.A washer missing or added in wrong place.
|
All times are GMT -5. The time now is 05:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands