The unofficial Honda Forum and Discussion Board Forums For Honda automobile and motorcycle enthusiasts.

This is my first post ever and I’m in a dilemma… I have zero idea on how I broke this piece where installing my cold air intake but someway I did. I have no idea where to get it but if someone can help identify where I can get this piece it’ll help. It’s a T connector and the outlet goes connected to the lower hose into the intake. I tried to take off the gold nut connected but the hose was turning with it and I didn’t want to break that as well. I would like to buy the piece brand new but I need to know what it is in the first place then I’ll gladly break the **** with the tube and all…
https://cimg1.ibsrv.net/gimg/hondafo...c761a2b50.jpeg
Where can I find the entire thing ?
https://cimg2.ibsrv.net/gimg/hondafo...341a1c190.jpeg
This is the tube, connected to the engine.
https://cimg3.ibsrv.net/gimg/hondafo...704e99267.jpeg
The skinny tube to the right under the oil cap is what is connected to the entire thing, I was scared of breaking it.
https://cimg4.ibsrv.net/gimg/hondafo...3ecfa3dd1.jpeg
Outlet goes connected to it.
https://cimg5.ibsrv.net/gimg/hondafo...36fcc5ff3.jpeg
https://cimg6.ibsrv.net/gimg/hondafo...b69d7e956.jpeg
The grey piece is what had a outlet for the hose to go over thats connected to the intake.
https://cimg7.ibsrv.net/gimg/hondafo...79d759102.jpeg
An overview, ignore the rust.