95 Civic D16 Wire Tuck No Spark???
 

hi i have a 95 d16 civic i just finished a complete wire/brake line tuck. i went to start the car and it cranked like a champ but no life.i pulled the number one plug to check for spark and there isnt any at all..i have a new dist msd pro cap, msd wires, msd blaster 2 coil. i have power to my coil when the motor is turning over and before. msd said my coil was bad and i needed a new one...but i put the new stock cap and coil in today and it still has no spark.. i custom made my harness so im looking for ideas that may fix the problem before i have to cut into it again...i labled every wire before i did anything 1-1 2-2 ect cut what i needed out and soldered the wires back together...i am m.e.c.p certified so i dont thing its my wiring...any and all info/ideas would be greatly appriciated...thanks

welcome to the forum. I have seen on this forum from the past when a distributor is replaced, and there is power into the distributor, the coil/ignitor is not good. ( rebuilt ) have the distributor rechecked for power out. (not your fault)