PRIVATE For Sale / Trade Classifieds Sell/Trade your stuff for free! NO COMMERCIAL POSTS!

2000 civic SI, fully built boosted, all name brand parts!

Thread Tools
 
Search this Thread
 
  #1  
Old 08-17-2009 | 03:40 AM
ASar's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2009
Posts: 4
Default 2000 civic SI, fully built boosted, all name brand parts!

Ok I’ve been building this for over a year and it’s finally done, but I’m looking to sell it and start a new build. Engine has been dropped in and only has 400 actual miles on the engine.
I’ll start with the engine
B16a2 motor fully built at a performance shop, entire car and engine was professionally b built installed and set up. This was no garage mechanics project.
$10,000
- Head -
B16A2 Head
OEM VTEC solenoid
Mugen - Red Valve Cover
Medium Port and polished work
Honda Cam Gears (OEM Non Adjustable)
Comp part #57200; SEVERE STREET/COMPETITION cams
Comp - PART #760-16 Titanium Retainers
Comp - PART #913-SET Valve Spring set (with part #913-I-1 inner spring set for duel intake and duel exhaust springs)
OEM Honda Valves
Honda OEM push rods and rocker arms
A.R.P. Part # 208-4601 Head Studs
Magan Racing Turbo (Ram Horn Style) Exhaust manifold
Venom Intake Manifold (will get the part #)
NOS - Brand Direct Port Nitrous System (4 foggers drilled into the manifold, all lines solenoids, electronics 45lbs bottle, with Glow shift Nitrous press. gauge.)
Honda OEM Throttle body
Honda OEM fuel Rail
The fuel injector connection - Custom flowed w/ custom flow rate 750 cc high impedance fuel injectors with control box.
Garrett 60 trim T3/T4 turbo with oil feed and return lines and all fittings.

- Block - (rotating assembly has been balanced)
B16A2 Block
Eagle Part #1630311772LW ESP 4340 Lightweight Crank
Eagle Part # CRS5290H3D ESP H beam Forged Rods w/ A.R.P. bolts.
OEM Honda Main caps
J.E. low compression Forged Turbo Pistons w/ JE nitrous rings. (8.0 - 1 CR)
Clevite Main & rod Bearings
Acura Type R Integra high flow oil pump
OEM Honda Water pump
OEM Honda Fly Wheel
OEM Honda Timing belt
OEM Honda Oil pan (drilled with turbo return Line installed) & oil pick up tube.

Interior
APC racing seats (black & Blue)
AEM Wide band 02 gauge and sensor
AEM True boost, boost controller & Gauge
AEM Voltmeter Gauge
Glow Shift nitrous pressure gauge
Greddy turbo timer
Mugen Racing steering wheel, (W/ 2 nitrous buttons)
Body
SI blue 2000 civic SI coupe
3d image carbon fiber good (evo Style)
Si Spoiler
Lambo Door kit
Black out headlamps W/ hid headlights
APC upper rear strut tower support
Others
750 cc custom flow rated high impedance fuel injectors.
AEM Cat back exhaust
Aluminum racing radiator
Upgraded CV half shafts
5 speed hydraulic manual transmission















 
  #2  
Old 09-03-2009 | 04:18 AM
shalon234richard's Avatar
Junior Member
Joined: Sep 2009
Posts: 23
Default

this seems to be very good.one of my friend is very much interested will tell him about this vehicle....how is the performance of it?
 

Last edited by shalon234richard; 09-03-2009 at 03:41 PM.
  #3  
Old 09-18-2009 | 11:30 AM
ASar's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2009
Posts: 4
Default

cars performance is amazing need a little fine tuning on the fuel during cranking gotta mess with the off sets, it takes a few seconds to crank but ones its running its straight high boosting fun.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
atikovi
PRIVATE For Sale / Trade Classifieds
0
04-21-2014 08:58 AM
ASar
PRIVATE For Sale / Trade Classifieds
0
07-14-2009 05:27 PM
mskynsx
PRIVATE For Sale / Trade Classifieds
0
03-31-2009 12:40 AM
mskynsx
PRIVATE For Sale / Trade Classifieds
0
03-31-2009 12:36 AM
justins13
PRIVATE For Sale / Trade Classifieds
0
07-09-2008 07:16 PM




All times are GMT -5. The time now is 03:32 AM.