2008 Ridgeline Four Wheel Drive
 

Attempted to replace the pressure line to a friends 2008 Ridgeline. Got everything loose/removed except the fitting going into the rack. All previous research indicated a 14mm hex on the fitting requiring a likewise 14mm flare wrench, crowfoot socket, etc. Unfortunately, I didn't realize that this particular Ridgeline has a 19mm hex fitting so I had to abort the project. Anyone with previous experience please offer advice in how their project went as I'm hesitant to give it another go. What I really need is a ratcheting 19mm flare wrench but don't believe there is such an animal.