Honda Accord 1989 LXI
#1
09-07-2009, 12:39 AM
Honda Accord 1989 LXI
Hello,
I need help or suggestion from anybody out there who had a same or similar problem that I'm having with my 89 Honda Accord LXI. The problem that I'm having consistently happening is the flactuating idle when full stop. The rpm needle will peg between 1200 to 1900 any given point. Before it will only randomly but now it's continous. However, when I release a bit of the cluth I can control to peg to 1000 rpm. I had already replaced the "FAST IDLE THERMO VALVE" and clean the " THROTTLE POSITIONING SENSOR but it did not resolve the issue. PLEASE HELP AND INPUT WILL BE APPRECIATED.
-geo
I need help or suggestion from anybody out there who had a same or similar problem that I'm having with my 89 Honda Accord LXI. The problem that I'm having consistently happening is the flactuating idle when full stop. The rpm needle will peg between 1200 to 1900 any given point. Before it will only randomly but now it's continous. However, when I release a bit of the cluth I can control to peg to 1000 rpm. I had already replaced the "FAST IDLE THERMO VALVE" and clean the " THROTTLE POSITIONING SENSOR but it did not resolve the issue. PLEASE HELP AND INPUT WILL BE APPRECIATED.
-geo
Thread
Thread Starter
Forum
Replies
Last Post
mudthrower
New Member Area
1
07-20-2011 05:44 AM
