91 Civic Si with DOHC ZC no start
#1
04-30-2009 | 04:37 AM
Thread Starter
|
Junior Member
Joined: Apr 2009
Posts: 5
91 Civic Si with DOHC ZC no start
Engine turns,
89 PG7 ecu,
Everything wired right (maybe)
New Dizzy.
Replaced C.A.S (cam angle sensor) out of 89 Integra
triple checked all grounds
new battery
and it's getting fuel
Running on stock Ignition Coil till it get's
No Spark.
Using SI Wire Harness modded for CAS for DOHC ZC.
Just no spark as far as i know.
would the cam angle sensor wired backwards keep the engine from sparking?
any help would be greatly appreciated.
89 PG7 ecu,
Everything wired right (maybe)
New Dizzy.
Replaced C.A.S (cam angle sensor) out of 89 Integra
triple checked all grounds
new battery
and it's getting fuel
Running on stock Ignition Coil till it get's
No Spark.
Using SI Wire Harness modded for CAS for DOHC ZC.
Just no spark as far as i know.
would the cam angle sensor wired backwards keep the engine from sparking?
any help would be greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
90civicDX
Honda Civic Forum
0
04-01-2009 10:32 AM
coupdecivic
Honda Forum Help & Suggestion Center
2
11-20-2006 02:14 AM
