alright so heres my situation i swaped out my b16a1 from my 89 honda crx si and put in the original motor which would be a d16a6 well now my car wont start wondering what is the problem i know that you have to cut 3 wires at the ecu for the b16a6 to work wat three wire do you need to cut and wat 3 wires do i need to plug back in to work i need help please.....i have spark in all four cylinders and good compression all the way across the board i have fuel if anyone knows my problem please let me know do i need to change out my wiring harness