2015 Accord EX-L 2.4L rear knuckle bushings
Thread Starter
|
Junior Member
Joined: Mar 2022
Posts: 3
2015 Accord EX-L 2.4L rear knuckle bushings
I need rear strut/knuckle bushing badly. The only way I can see to get it is in a legit Honda knuckle. All of these bushing have been very difficult to find. There are three in the knuckle. I had to purchase 2 extra lower rear links, just to scavenge a bushing out of one of them, and the forward(but still rear axle) link bushing was actually available from Rock Auto. The strut/knuckle busing is not found anywhere.
Re: 2015 Accord EX-L 2.4L
Thank you
Re: 2015 Accord EX-L 2.4L
Thank you
Thread Starter
|
Junior Member
Joined: Mar 2022
Posts: 3
How would I get a universal bushing? Anyone done this??
.Rear strut knuckle bushing.
Bushing OD (inserted, exposed): 44.88mm
Knuckle bore length: 26.2mm
Inner bolt cylinder ID: 14.8mm
Inner cylinder length: 48mm
.Rear strut knuckle bushing.
Bushing OD (inserted, exposed): 44.88mm
Knuckle bore length: 26.2mm
Inner bolt cylinder ID: 14.8mm
Inner cylinder length: 48mm
Senior Member
Joined: Feb 2022
Posts: 1,675
Thread
Thread Starter
Forum
Replies
Last Post
carid
Member Group And Special Buys
0
Jun 22, 2015 06:45 AM
smartbel
Honda Accord Forum
3
May 8, 2015 07:02 PM