I have a 1991 honda civic lx and I have replaced the starter, ecu, distributor, wires and spark pulgs. I can get the car to turn over but will not start. I am not getting any spark at all but I have power to the distributor. I have checked for voltage and I am getting it and the distributer will turn. I am so lost can anyone please help me?

 

welcome to the forum. If the distributor is rebuilt, the coil has been known to fail. I take it that the timing is set proper on the cam gear, and you did start with #1 top dead center. ( not bottom ) no spark from the distributor is normally coil.

 

The distributor is not a rebuilt one! It is brand new I made sure because of problems that I have with rebuilt ones before. I did not set the timing right. I was told that the car would still spark with out the timing being right! I did not want to waist the time with timing it if I could not get a spark at all. Any other ideas? Thanks for you help...

 

my da is having the same prob it jumped time and the intake cam spun 180 out and thats causing mine not to spark ive had to replace my head and it fires now