The unofficial Honda Forum and Discussion Board Forums For Honda automobile and motorcycle enthusiasts.

Honda Forum Help & Suggestion Center Need help with Honda Civic Forum? Ask. Have a suggestion to better HCF? Tell us here.

2011 Honda CRV, can't line up wheel bearing assembly with strut bolts front right si

   
Old Apr 21, 2022 | 10:23 AM
Share
  #1  
BIllyblues's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2022
Posts: 6
From: Virginia
Default 2011 Honda CRV, can't line up wheel bearing assembly with strut bolts front right si
0
 
Reply
Old Apr 21, 2022 | 12:44 PM
Share
  #2  
grcauto's Avatar
Senior Member
Joined: Feb 2022
Posts: 1,669
Default
You need to jack the knuckle up.
 
Reply
Old Apr 21, 2022 | 02:34 PM
Share
  #3  
grcauto's Avatar
Senior Member
Joined: Feb 2022
Posts: 1,669
Default
Take a picture from further back so I can see it all.
 
Reply
Old Apr 21, 2022 | 03:03 PM
Share
  #4  
BIllyblues's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2022
Posts: 6
From: Virginia
Default
Spoiler
 

 
Reply
Old Apr 21, 2022 | 04:23 PM
Share
  #5  
grcauto's Avatar
Senior Member
Joined: Feb 2022
Posts: 1,669
Default
I can't tell what you are struggling with. Raise and lower until it lines up enough to get a bolt in. Once you have one it is easy.
 
Reply
Old Apr 21, 2022 | 04:35 PM
Share
  #6  
BIllyblues's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2022
Posts: 6
From: Virginia
Default
Originally Posted by grcauto
I can't tell what you are struggling with. Raise and lower until it lines up enough to get a bolt in. Once you have one it is easy.
# Ok i have n,tried strut won't move ss the bolt on the upper ball joint is way off ?? Ill try again
thanks for your reply.
 
Reply
Old Apr 22, 2022 | 12:59 AM
Share
  #7  
avisitor's Avatar
Senior Member
Joined: Sep 2018
Posts: 1,466
Default
Is the upper part of the strut in the correct mounting holes?
 
Reply
Old Apr 22, 2022 | 08:37 AM
Share
  #8  
BIllyblues's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2022
Posts: 6
From: Virginia
Default
Originally Posted by avisitor
Is the upper part of the strut in the correct mounting holes?
yes it is thank you for replying, should i worry about sway bars ?
 
Reply
Old Apr 22, 2022 | 11:53 AM
Share
  #9  
avisitor's Avatar
Senior Member
Joined: Sep 2018
Posts: 1,466
Default
Originally Posted by BIllyblues
yes it is thank you for replying, should i worry about sway bars ?
Your son must have seen what was wrong and fixed it already??
May just needed to be forced into correct position?
Sway bar? If it was not moved then probably not
 
Reply
Old Apr 22, 2022 | 12:27 PM
Share
  #10  
grcauto's Avatar
Senior Member
Joined: Feb 2022
Posts: 1,669
Default
The sway bar is connected to the lower control arm. Did you disconnect it? That may be why you are not getting it up in place.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2020 Honda Civic - Interior Wheel Controls
Nkoby97
New Member Area
1
Jul 5, 2021 10:02 PM
03 pilot wheel offset
Redbeardpilot03
Honda Forum Help & Suggestion Center
1
Dec 30, 2020 07:22 PM
Newbie with a CR-V
lornoyy
New Member Area
4
Sep 20, 2019 02:35 AM
D15b7 rocker arm assembly bolts?
Deadpool
Honda Forum Help & Suggestion Center
1
Feb 12, 2018 01:02 AM
Back to Subforum
Honda Forum Help & Suggestion Center
View Next Unread
2007 honda civic no start


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 10:25 AM.