XENTECH HID CONVERSION KITS
BLOW OUT SALE!
http://www.paypal.comHID CONVERSiON KITS $ 120 SHIPPED



HID COVERSION KITS INCLUDED:
2 x Ballasts
2 Xenon Bulbs
10 Zip ties
2 Heavy duty heat resistant double sided self-adhesive pads
2 Connector
Manual
Warranty Card (Required for warranty replacement)
Feel free to call if you have any question:
William
Cell:909.569.5656
email:gotu127@hotmail.com
Paypal: gotu127@hotmail.com(if you place an order let me know ur blub size and temperature u want..

or just post I'll reply asap!!



BULB SIZE: H1, H3, H4/9003(low), H7, H8,H9, H10, H11, H13/9008(Low),9004(Low), 9005, 9006, 9007(Low)

COLOR: 3000K, 5000K, 6000k, 8000k, 10000k, 12000k, 30000k
Pleasse note: when installing the kit with the (Low) beam only, you will loose your high beam , however, the adjustment in the capsule will compensate for the lost of the high beam, and it will be alot brighter than your halogen high beam and yet not blinding.
Please Dont forget to specify the following information!!!
Features
This Kit is mannufacturered under strict quality control and the factory is ISO-9001 certified. The ballast and the burner in this kit have passed the most stringest OEM specific test by Toyota (Denso) of Japan, and they uses these ballast for the OE market in the Southern Americas region and some of the southern Asia countries.
100% water proof construction, you can submerge the entire kit under water and it will function correctly
Integrated one piece Ballast, simplified wiring which eliminates any unnecessary confusion during install.
More than 16+ bulb types, we will have the right bulb type for your vehicle
0.3% failure rate, compared to 5-10% failure rate of other HID Conversion kits currently out on the market, the reliability is comparable to that of OEM HIDs
Color temperature output has tolerance of +/- 100K, the tolerance is unnoticeable by human eyes
Superior lumen output compare to its competitor
Best quality burners from Bosch Japan
Choose from 5 different color temperature, you will indefinitely find the color out put of your choice
Specification
H1, H3, H4(low), 9003(low) ,HB2(low) , H6, H7, H8, H9, H10, 9145, H11, H13(low), 9008 (Low), 880/881 (All 800 series), 9004(low), HB1(Low), 9005, HB3, 9006, HB4, 9007(low), HB5 (Low)
Power consumption: 35watts
Voltage: 85V +/- 17V
Luminous flux: 2800
Service Life: up to 3000hrs
Input Voltage: 9V-16V
Working current (Steady state): 3.5 A nom
Ignition voltage: 24kV Peak Max, 18kV Peak Min
Lamp Frequency: 450 Hz
Warranty
The ballast and the bulbs will come with one (12 months) year warranty under normal use. Warranty will cover all normal defects, any physical damages will void the warranty.
Shipping Terms and Conditions
1. Payment methods
A) Paypal (Confirmed shipping address only)
B) Money order
C) Personal Check (10 days to clear)
2. Item will be shipped by USPS via the following methods
A) Free USPS Priority 3 - 5 days (Only US)
B) USPS Express Next day to most areas $20 Extra (Place order after 12:00pm PST might delay shpiging and shipping address must be within United State)

3). International shipping (Must call In)
4). 20% Restocking fee, shipping expenses apply to all functional returned products.

 

F.A.Q.
Q. Can't I just purchase a stronger watt halogen bulb to get a brighter light?
A. XENON H.I.D. lamps are 35 watts while traditional halogen bulbs are 55 watts. Even though XENON H.I.D. lamps draw less wattage and current, they produce 3 times more light than its counter part, halogen bulbs. Lower wattage does not mean less light output, Xenon are much more efficient, in another word, more power is being put in to more functional use, similar to a smaller liter engine are capabile of producting more power than bigger engine with more liter because it is more efficient. Increasing the wattage will make the bulb a little brighter however it will create excess heat and it will damage your housing and harness. Also, AMPS = WATT(55watts in most cases)/ BATTERY VOLTAGE OUTPUT (12V). So as you increase the wattage on your bulb you increase the current draw on your entire electrical system. This is critical in motorcycle applications.
Q. Can I Install the kit myself?
A. For anyone who is mechanically inclined, this installation is considered "do-it-yourself". While a typical installation takes approximately an hour and some application can even be installed in 20 min, it can vary depending on application (conversion or auxiliary). Our kits are ready to install right-out-of-the-box and come complete with everything that you will need. We also provide you a full set of easy-to-read, step-by-step instructions to guide you.
Q. What is the difference between genuine XENON HID lights and Xenon gas-filled bulbs?
A. High Intensity Discharge (H.I.D.) is a type of lighting technology that replaces the filament of the light bulb with Xenon gas. The gas is ignited to produce an arc of light, when high voltage is applied. The amount of light output is three times that of a standard halogen bulb. The lamps also glow at a higher light temperature (closer to natural sunlight) that gives it its distinct color and appearance, and on the other hand, the Xenon gas filled bulbs are still traditional filamented bulbs, however they replace the halogen gas with xenon gas so it appears whiter and last abit longer when its operating at higher wattege .
Q. Could I re-install the original halogen bulbs after the XENON H.I.D. kit has been installed?
A. With the growing popularity of leasing vehicles, a big concern is whether or not you can bring the vehicle back to its original factory condition. Our kits install with little or no modifications to your vehicle. If need be, the entire kit can be removed and the original halogen bulbs replaced. This kit can be re-installed into another vehicle that uses the same bulb size, therefore, the install is 100% reversable.
Q. What about the quality of your product?
A. The are extensive technology being put in to the making of these ballasts and bulbs, thanks to the effort of many Hella engineers for the ballast and Philips engineers. These kits are trusted by OEM dealer and they installed these kit in their car and seller it for thousands more, and now you can get the same quality kit at fraction of that price.
Q. Why cann't replace the halogen bulb in my vehicle with XENON HID lamps with out having to purchase the entire kit?
A. Motorcycles and automobiles currently use a 12 Volt electrical system for their headlamps. XENON HID lighting systems require over 20,000 volts to ignite the bulbs. Once lit, they only require 85 volts to keep running. Our kits include a power pack that is necessary for the lamps to turn on. The input of the power pack is 9-16 volts. It is an integral part of the system. You DO NOT require any additional components to install the xenon HID lamp into the original socket of the halogen bulb.
Q. What's the warrenty period for these HID kits?
A. The ballasts and bulbs come with 212 months warranty from all factory defects. If any component fails within warranty period, we will replace the defective component immediately. Contact us with a description of the problem and we will be happy to assist.

 

As request here is some sample pics from our customers car... :thumbup:

 

 

Many people couldn't find the bulb size for their car here is helpful link:
http://www.sylvania.com/Consum...t.htm
Thanks
=)