I am assembling a VT 1100 C2. The motor is in and all wiring fitted. The last "easy" part - I am totally stumped - I cannot work out ho the coolant tubes fit ! Does somebody have a diagram that shows how the tubes fit from the expansion tank above the carbs and to the top of the front outlet tube to the head ? There is a tube rising from the left side crank case, where does this fit in ? All comments welcome.

 

welcome to the forum. https://www.bikebandit.com/oem-parts...4085#sch633715

 

Hi Acmech52,
Thank you for the link. I will have a look tomorrow but there is a little confusion this end. I have a pipe with a "Y" junction that isn't in the parts diagram.
Thanks again.

 

some year models are different. check a year early or later to see if there might have been a change.

 

hi amech52,
tthanks for the link its really helpful. Ferrocine Homeopathic