1997 TPS Calibration
Thread Starter
|
Junior Member
Joined: Sep 2024
Posts: 1
1997 TPS Calibration
Hi,
I have a 1997 CR-V and have been having issues with calibration of a replacement TPS sensor. I understand the service manual states the output voltage of the TPS sensor should be begin at “about” 0.5 and top out at 4.5 volts DC, but I am having issues getting the TPS sensor to output those values. If I set it to begin at 0.5 volts it only tops out at WOT at about 4.1 volts. Is this normal or am I missing something?
I have a 1997 CR-V and have been having issues with calibration of a replacement TPS sensor. I understand the service manual states the output voltage of the TPS sensor should be begin at “about” 0.5 and top out at 4.5 volts DC, but I am having issues getting the TPS sensor to output those values. If I set it to begin at 0.5 volts it only tops out at WOT at about 4.1 volts. Is this normal or am I missing something?
Senior Member
Joined: Feb 2022
Posts: 1,672
Thread
Thread Starter
Forum
Replies
Last Post