hard saddle bags
#1
hard saddle bags
Just installed new hard saddlebags with turn signal lights in the bags. After installing the right side, I checked to see if the turn signal light worked and it did, but was flashing faster than normal. Then I installed the left one and I now have no lights on the bags and the front lights remain on. When I move the turn signal switch to the right, the left light (in the front) goes out. When I move the turn signal switch to the left, the right light (in the front) goes out. Also the brake light stays on and when I activate the brake, nothing changes it just stays lit as if I were applying the brake. When first removing the original lights I detached the original wiring in the back and attached the bag lights per color coded wiring same as the original ( blue and green on the right side, green and orange on the left). Not understanding what happened. Could someone (who has electrical knowledge more than me) advise me.
Thread
Thread Starter
Forum
Replies
Last Post