01 Odyssey Question
#1
01 Odyssey Question
I bought the following stereo from BestBuy and installed it successfully. However, I'm not sure which wire from the car I need to connect to my harness in order to send the signal from the remote on the steering while into the stereo I recently installed.
If anything is unclear, please tell me, I'd be happy to tell you so I can resolve this issue.
Thanks
If anything is unclear, please tell me, I'd be happy to tell you so I can resolve this issue.
Thanks
#2
did you look on the bottom of the radio ??? http://www.amazon.com/gp/customer-me...&totalImages=5
Last edited by lowlife9; 03-11-2013 at 01:47 PM.
#3
did you look on the bottom of the radio ??? http://www.amazon.com/gp/customer-me...&totalImages=5
#4
did you purchase a separate wiring harness specifically for your car or are you using the harness that came with the stereo because the ones made for your car should be color matched nor need splicing at all it should be plug and play. you can also search the internet for wiring schematics or contact a honda dealer.
Last edited by lowlife9; 03-11-2013 at 09:20 PM.
#5
did you purchase a separate wiring harness specifically for your car or are you using the harness that came with the stereo because the ones made for your car should be color matched nor need splicing at all it should be plug and play. you can also search the internet for wiring schematics or contact a honda dealer.
Thanks for the help
#7
i sure hope so, if you find anything please be sure to show me. Thank you again for your time and help
#10
A link would be appreciated, also that doesnt seem to make sense as i could just use the exisisting wires on my current harness that are intended for steering wheel control