1999 Accord 2.3l died on the highway. No CEL and the engine never stopped running,
#1
1999 Accord 2.3l died on the highway. No CEL and the engine never stopped running,
The car wouldn’t move, wouldn’t rev over 1,500 RPM, and after a while I couldn’t connect to the ECU.The car drove fine until suddenly slowing to a stop without any warning. Everything on the dash looked fine. Nothing looked out of the ordinary–until I tried to move or rev.
I keep an OBD-II bluetooth dongle plugged in and checked for pending codes as soon as I started losing power. There weren’t any, but when I tried it again Torque just said it couldn’t connect.
Mom drove me home and a tow truck took my car to a shop, but the driver said he drove my car up the ramp, it just hesitated to start.
My mechanic drove her for 10 miles and idled for an hour without an issue. I immediately drove to AutoZone and someone checked my battery and alternator, saying they were working perfectly, but told me to clean the little bit of corrosion on my terminals.
I have driven my car for 4 days without a problem, not even any hesitation on startup.
By the way, she had a quarter tank.
What do I check next?
Thank you very much! Have a great day!
I keep an OBD-II bluetooth dongle plugged in and checked for pending codes as soon as I started losing power. There weren’t any, but when I tried it again Torque just said it couldn’t connect.
Mom drove me home and a tow truck took my car to a shop, but the driver said he drove my car up the ramp, it just hesitated to start.
My mechanic drove her for 10 miles and idled for an hour without an issue. I immediately drove to AutoZone and someone checked my battery and alternator, saying they were working perfectly, but told me to clean the little bit of corrosion on my terminals.
I have driven my car for 4 days without a problem, not even any hesitation on startup.
By the way, she had a quarter tank.
What do I check next?
Thank you very much! Have a great day!
Thread
Thread Starter
Forum
Replies
Last Post