Hi everyone, maybe there is a Honda mechanic on here that can help me. I make adapters for various engines to different transmissions, mostly Audi or Porsche, for guys building custom mid-engine cars. One of my customers wants to use a J32A2 engine from an Acura TL type S car. I will need an engine to take some measurements from and would like to know if all the J series V6 engines will have the same bellhousing dimensions/bolt pattern as well as the same crankshaft rear dimensions. If they are that will make finding an engine much easier. Thanks for any help anyone can give me. I am in the Dallas TX area if there is anyone close here who might have an engine I could look at.