My accord took on a culvert last weekend and now my passenger front wheel has been pushed back 1.5". The impact was on the frame cross-member right in front of the radius rod connection. The front of the cross member is "dinged up but the bolts weren't sheared and the cross member itself seems to be straight. If fact all of the suspension components seem straight(at least to me). If my wheel is pushed back 1.5" I would think I should see something bent (shouldn't I?). Car seems to drive fine and the wheel doesn't rub on the fender. I was going to take the radius rod off to see if I could pull the wheel forward but I thought I'd ask the forum before I got started. Any idea's what I should look for first?

 

Take it to an Alignment specialist