98 CRV - 360,000km

Clutch is at the floor, tried bleeding with no luck. Engine still runs like a watch and I hate to junk it. So I am going to replace the master, the line from the slave to the master and the throw out barring. I was wondering if anyone else had thoughts on what else could be causing the problem.

BTW I am still driving it clutchless. Starting roll in 1st and get it up to the 2200 then pop in into second and so on.

Any help would be appreciated.

Oh ya, my first post here

 

welcome to the forum i would be thinking on the same lines as you stated. also when the clutch diaphram gets weak, you can have the same clutch to the floor effect.