Random Misfire P300 at Idle
#1
Random Misfire P300 at Idle
I have a 99 Accord 3.0. I am getting a random misfire code. I have changed the cap, rotor, plugs (NGK), Wires (NGK), Control Module, Coil, Distributor, and still cant figure it out.
I dont think its a valve problem either because Here what really meaks me go insane is that when is high Humidity out raining as i drive it it goes away. But when its dry out it comes back. It does it when its a cold start but you can really feel it whan its warmed up.
The egr is new and the port is cleaned. Pcv is new as well. And a new Cat. I have heard that it could be the ECM so i found it and felt it, it was just a very little bit warm not hot at all. I am not sure if it could be an injector problem.
Has anyone ever ran into this type of problem. I have talked to a few differnt people and they seem to think its an electrical problem. Any that could help it would be greatly appericated.
I dont think its a valve problem either because Here what really meaks me go insane is that when is high Humidity out raining as i drive it it goes away. But when its dry out it comes back. It does it when its a cold start but you can really feel it whan its warmed up.
The egr is new and the port is cleaned. Pcv is new as well. And a new Cat. I have heard that it could be the ECM so i found it and felt it, it was just a very little bit warm not hot at all. I am not sure if it could be an injector problem.
Has anyone ever ran into this type of problem. I have talked to a few differnt people and they seem to think its an electrical problem. Any that could help it would be greatly appericated.
Thread
Thread Starter
Forum
Replies
Last Post
TimThein
Honda Civic Forum
1
09-11-2006 07:26 PM