Please help..

I've got 2x Bigfoot 60 motors fitted on my boat and after being not in use for 2 years and fuel pumps being replaced i can manage to start the motors but immediately after startup the fuel pressure drops down to zero and the motors stalls.

Can anybody please assist on this issue?
Any help or advice will be appreciated.

Thank you in advance.
Dries.

 

welcome to the forum. have you checked the fuel tank for sediment and filters to be clear of debri. sometimes the carb will get gummed up and sticky to allow fuel to flow properly. and then make sure there are no collapsed fuel line due to age.

 

Thank you!
All the fuel lines,fuel tanks ect is brand new and these motors are fuel injected and not carb models.
Maybe I should opt to refit my 2 85 yamahas


Kind regards.
Dries.