When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello, I have a 2009 CR-V that had an issue where the key would not turn in the ignition. I removed the lock cylinder a few days ago and have been using a screwdriver (as shown in picture below) along with the key fob to start the car, which has worked fine. This morning I could not get the screwdriver to turn the ignition at all. I tried turning the steering wheel to make sure it wasn't locked, did a shift release and put it in neutral, but that didn't help. I looked around best I could but I could not see anything I could disengage in any way to get it to turn. Any ideas? Thanks, Tim!
Ignition switch stuck
